Spiral Bevel Gear Manufacturer Since 2015

Spiral Bevel Gear Manufacturer in India

Custom Spiral Bevel Gears, Bevel Gears and Matched Gear-and-Pinion Sets for OEMs, Gearbox Makers and Plant Maintenance, Made to Drawing or Sample at Our Manufacturing Unit in Gujarat Since 2015.

Spiral Bevel Gear Manufacturer in India
1–25Module range
1200 mmMaximum diameter
150 mmMaximum face width
500+Projects since 2015
70%Exported

Products

Spiral Bevel and Bevel Gears, Made to Your Requirement

Agni Engineering, the trade name of Revanta Enterprises, manufactures spiral bevel gears, bevel gears, crown wheel and pinion sets, hypoid and Zerol gears. Every set is made to the customer's drawing, a worn sample, or application data, from a single prototype to repeat production.

Tooth cutting, lapping and grinding are all done in-house at our manufacturing unit on the Deesa–Patan Highway in North Gujarat, so one team controls the contact pattern, backlash and set marking from blank to dispatch.

What We Make

Who We Work for

We manufacture gears for gearbox makers and machine builders, and for plants in the cement, steel, oil and petrochemical industries, as well as mining, sugar and power. About 70% of our work is exported, so matched sets are inspected, marked and packed to export standard as a matter of routine. See the industries we serve.

How an Order Runs

  1. Send the drawing or sample, the quantity and the duty (speed, torque, ratio).
  2. We review the geometry, material and heat treatment and send a quotation with clear assumptions.
  3. After approval, we manufacture, inspect the contact pattern and backlash, and pack the set.

Read more about our manufacturing capabilities and quality and inspection.

Who we are

A gear works that makes one family of gears

Agni Engineering is the trade name of Revanta Enterprises. Since 2015 we have made spiral bevel gears, bevel gears and matched gear-and-pinion sets at our manufacturing unit on the Deesa–Patan Highway in Patan district, Gujarat.

More than 500 projects have gone through the works, for gearbox makers, machine builders and plant maintenance teams in India and abroad. Read more about us.

Manufacturing Capabilities
Reverse Engineering Bevel Gears

Materials and heat treatment

The material follows the duty

Spiral bevel gears are usually cut from case-hardening alloy steels such as 20MnCr5, 16MnCr5, 8620, 18CrNiMo7-6 and EN353, carburised to a surface hardness commonly around 58 to 62 HRC over a tougher core. After hardening, the pair is lapped or ground to restore the tooth contact.

See bevel gear materials and heat treatment.

Hardened Spiral Bevel Gear

Inspection and packing

Checked as a pair before dispatch

Every set is checked for contact pattern and backlash, and the gear and pinion are marked as a matched pair so they stay together. Sets for export are packed to export standard.

See quality and inspection.

RFQ Information Checklist

Engineering Guides

Frequently Asked Questions

What is the largest spiral bevel gear you can make?

We make spiral bevel gear sets up to 1200 mm diameter, module 1 to 25, with face width up to 150 mm. Send the drawing or the duty details and we confirm the size and material before quoting.

Can you make a gear from a worn sample, without a drawing?

Yes. We reverse-engineer worn or obsolete gears. Send the worn gear, and the mating gear if you have it, with the shaft arrangement and the duty. We measure the tooth geometry, confirm the material and make a replacement set.

What is the difference between lapped and ground spiral bevel gears?

Lapped gears are finished after hardening by running the gear and pinion together, so they are supplied as a matched pair. Ground spiral bevel gears are finished on a grinding machine after heat treatment, for higher accuracy, lower noise and higher speed.

Do you export spiral bevel gears?

Yes. About 70% of our work is exported. Matched sets are inspected, marked and packed to export standard as a matter of routine.

What should I send for a quotation?

The drawing or a worn sample, the quantity and the duty (speed, torque and ratio). If the material or heat treatment is already fixed, send that too. See what to include in an enquiry.

Need spiral bevel gears made to your drawing?

Send us the drawing or a worn sample. Our engineering team will review it and reply with a clear quotation.

Send Your Requirement

Share your drawing, sample details, quantity and delivery location. Our engineering team will review it and reply.